A self-copy remote control convenient for people to use through simple operation.
Easy to operate.
No soldering code required.
Duplicate your existing remote control in case you lost it.
Widely applicable, suitable for various remote control.
Power Supply: DC12V
Power Consumption: below 8 mA
Operating Frequency: 315MHz / 433.92MHz
Modulation Type: AM
Wireless Tx Power: below 10MV
Encoding type: Self-copy
Operation Temperature: -20-60
Item Size: 58.7 * 30 * 14mm / 2.31 * 1.18 * 0.55in
Package Size: 7 * 3.7 * 2cm / 2.76 * 1.46 * 0.79in
Item Weight: 45g / 1.59oz
Package Weight: 45g / 1.59oz
Delete the existing code of our remote duplicator:
1)Click and Hold A and B buttons together - LED will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted !
Clone your original remote:
1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until LED will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
Recover the code that you deleted unheeding:
1)Keep holding the last 2 buttons(C and D button)together of this remote dulicaptor - LED will flashing
2)Release both buttons and click any button - LED will keep lightening, then the code recovered
If for some reasons one of the button can't work:
1)Delete the existing code
2)Recopy the code of the button which didn't work
3)Delete the existing code
Your existing remote control should be well function with compatible chip and correct frequency.
Our remote duplicator can only copy chips with fixed code and learning code.
Two way code remote control, rolling code remote control and encryption program remote control can't be copy.
Before you dulicapte your existing remote control, please make sure that the original code has been deleted.
Away from all of the electronic signal when copy code,please check if the batteries of the remote control are enough or not, the distance of these two remote controls should be as closely as possible and make sure that the transmitted signal of your original remote control is normal your original.
This chip type that can be copied: 2260(such as PT2260, SC2260, HS2260, LX2260, HX2260, etc); 2262(such as PT2262, SC2262, HS2262, LX2262, HX2262, etc); PT2264; PT2240(LX2240, LX2241, SCL2240); CS5211, 1527(EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527); SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6027, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC6F630, ULN2003, HCS101, HCS200\HCS20019(part of code), HCS300\HCS3001(part of code), part off the single chip microcomputer.
1 * Remote Control Duplicator