1.The measuring value of object doesn′t surpass its biggest measuring range.
2.Don′t supply the voltage when it is on resistant gear position.
3.Don′t use the multimeter when the battery is not fully installed or the rear cover is loose.
4.Only when the pen disconnects the test object and the switch is off, the battery and safety fuse can be replaced.
5.Battery and safety fuse replacement: If you need to replace the battery and safety fuse, please remember replace them with the new ones of the same models.
New and high quality
CMOS integrated circuit and dual slope A/D conversion, auto zero and select polarity
70 x 40mm big lcd screen, word size up to 25mm
The best display visual angle is approx 70°
It will auto turn off after starting up 25 minutes
High reliable measure range and 32 gears are more effective to avoid false operation
Support transistor add Diode test
|DC Voltage||200mV - 600V ±(0.5% ± 2dgts)|
|AC Voltage||200 / 600V ±(1.2% ± 10dgts)|
|DC Current||200uA - 10A ±(1.0% + 2dgts)|
|Resistance||200 Ω - 2M Ω±(0.8% ± 3?dgts)|
|Packing||15 x 10.5 x 5.2cm / 5.9" x 4.1" x 2.0" (L x W x H)|
1 x Digital 3 1/2 LCD Voltmeter Ammeter Ohmmeter Multimeter Black Yellow
Please do not change the inner circuit to aviod damaging the ammeter
Do not connect it to the voltage over 1000VDC or 750VAC
Make sure not connect the error measure range
Please do not use the ammeter if the back cover is wrong
Please remove the pen and cut off the power before replacing battery and fuze